![]()
Members List:
Links Section
|
The Shipyards This is the club shipyards page. Here are the boats/ships the club members are building/built/bashed. Let's start with the bashing of the Clubs' Work Horse..."BELINDA".
![]() Here is how she looked new...an Altantic Harbor Tug
![]() She was a "Ready to Run"...(RTR) boat and needed major changes.
![]() All the toyish stuff has to go!
![]() Can't remember when the shipyard was that clean!
![]() Building a new mast.
![]() Add sound and new radio electronics.
![]() New paint...too bad I'm going to trash it!
![]() More details added.
![]() Old...vs...new...time for more power.
![]() New power plant with reduction gears.
![]() Now for the final touches...lots of scrapes and rust!
![]() ![]()
![]()
![]()
![]() Now this is what a woking tug should look like!
Here are some upgrades for the Nirvana Racing Yacht.
![]() Original radio gear...note sponge to catch water. ![]() Old receiver has missing box replaced with saran wrap and tape.
![]() New sail servo and DX6 receiver...note how antenna is routed...no external wires.
![]() Capt. Crash's solution for a cheap sail protector.
![]() Capt. Crash's "War Eagle" after a paint job...also note upgraded boat stand made out of a TV tray. Capt. Scooter's "Midwest" Liberty Tug (build in progress)
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]() Capt. Crash's Vac-U-Cracker Crackerbox Racing Boat "Claim jumper"
![]() Parts laid out with homemade decals.
![]() Hull liner drilling in progress.
![]() Liner glued to hull.
![]() Parts cut and test fitted.
![]() Powerplant fitted.
![]() Shark fin and drive shaft in place.
![]() Decals and paint.
![]() Millbrook is the Home Port.
![]()
![]()
![]() Trim tabs and electronics in place.
![]() Boat is completed with styro in the bow, under the deck.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 495 Visitors |
Crackerbox Racing |
Ships Log |
Photographic Memories |
The Boats |
The Shipyards |
Non-Club Sailing HOME | WRITE US |